IN8P-W - Heavy Duty Tall Infiltration Rings 6 inch and 12 Inch x 7 inches tall - With Port for IN12-W

$425.00
(No reviews yet) Write a Review
SKU:
IN8P-W
IN8P-W - Turf-Tec Heavy Duty Tall Infiltration Rings - 6 and 12 inch diameter by 7 inches tall with ports for optional Mariotte Tubes

Turf-Tec International, Tallahassee, Florida. USA (850) 580-4026

Photo showing IN8P-W Turf-Tec Heavy Duty Tall Infiltration Rings - 6 and 12 inch diameter by 7 inches tall with ports for optional Mariotte Tubes

IN8P-W Shown with optional IN12-W Mariotte Tubes

The Turf-Tec Heavy Duty Tall Infiltration Rings have a 6 inch inner ring and a 12 inch outer ring with a 7 inch height. A gripped rubber handle is welded across the rings to keep them concentric and allow easy insertion into, and removal from the soil. These rings are ideal for rocky or hard soil types.

IN8P-W Shown with optional IN6-W driving plate

 

IN8P-W -  Turf-Tec Heavy Duty Tall Infiltration Rings with ports

6 and 12 inch diameter by 7 inches tall Double Ring Infiltrometer

The new Turf-Tec Heavy Duty Tall Infiltration Rings allow the field infiltration rates to be measured. This tool conforms to the 2006 Pennsylvania Stormwater Best Management Practices Manual.

The Turf-Tec Heavy Duty Tall Infiltration Rings have a 6 inch inner ring and a 12 inch outer ring with a 7 inch height. A gripped rubber handle is welded across the rings to keep them concentric and allow easy insertion into, and removal from the soil. These rings are ideal for hard soil types.  These Infiltration rings are constructed of heavy duty 16 Gauge (.065 inch) galvanized steel to prevent rust and insure a long life.

Determine soil infiltration rate in a little as fifteen minutes*

Now, for the first time, a field instrument to measure the rate of water  infiltration on all areas. This instrument determines the downward flow of water  through the soil.  Rings come complete with two ports to attach optional Mariotte Tubes (IN12-W). These rings are ideal for  hard soil types. The rings are centered by the welded handle on the top of the  unit; this insures the rings stay in place while driving them into the soil. The  double ring insures accuracy.

* 15 minute test is after soil reaches saturation

The new Turf-Tec Heavy Duty Tall Infiltration Rings conform to the new  2006 Pennsylvania DEP (Department of Environmental Protection) recommendations to test for storm water  for soil evaluation and  for Infiltration BMP's Design Guidelines.

From:  http://www.depweb.state.pa.us/watershedmgmt/site/default.asp

Link: to File: BMP  Manual Appendix C See Appendix C - Protocols for Structural BMP's

 Now, for the first time, a field instrument to measure the rate of water infiltration on all areas. This instrument determines the downward flow of water through the soil.  Rings come complete with two ports to attach optional Mariotte Tubes (IN12-W).  Photo showing optional driving plate IN6-W

Check Infiltration on:

  • Soil Evaluation
  • Retention ponds
  • Wetlands
  • Drain fields
  • Forestry
  • Site Planning
  • Storm water recharge areas
  • Golf courses
  • Sports fields
  • New construction

Specifications:

  • Six inch and twelve inch rings (15.24 cm X 30.48 cm)
  • Height of seven inches (17.78 cm)
  • Sturdy construction
  • Rust proof galvanized metal 16 Gauge (.060 inch)
  • Double ring
  • Rings are welded into place to insure proper placement
  • Economical
  • Easy to use
  • Unit has 1/2 inch ports added to allow IN12-W Mariotte Tubes to be attached (IN12-W Purchased separately)
  • Weight approximately 11 lbs

Photo showing IN8P-W Turf-Tec Heavy Duty Tall Infiltration Rings - 6 and 12 inch diameter by 7 inches tall with ports for optional Mariotte Tubes 

Photo showing IN8P-W Turf-Tec Heavy Duty Tall Infiltration Rings - 6 and 12 inch diameter by 7 inches tall with ports for optional Mariotte Tubes - Ports are located three inches from bottom of rings allowing three inch insertion into the soil and five inches of water on top of soil.

          IN8P-W  - Turf-Tec Heavy Duty Tall Infiltration Rings 6 and 12 inch diameter by 7 inches tall with ports for optional Mariotte Tubes

Click here to download instruction manual

 

 
Click here to download Turf-Tec International's free Excel spreadsheet for IN7-W, IN8-W and IN8P-W - 6 and 12 inch Infiltration Rings infiltration test

 

Turf-Tec International Terms of Sale and Warranty LIMITED WARRANTY OF TURF-TEC INTERNATIONAL PRODUCTS Turfgrass Products Corporation - dba - Turf-Tec International ("Seller") warrants to the final purchaser, that all Turf-Tec International tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired by persons other than Turf-Tec International. To make a claim under this Limited Warranty, you must return the complete tool, transportation prepaid, to Turf-Tec International after contacting Turf-Tec International and receiving a return authorization number. Please include a dated proof of purchase with your tool. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY. Return Policy: Turf-Tec International has been in business since 1976 and we pride ourselves in producing quality tools that last for years and years. We offer a 100% satisfaction guarantee on all of our products and will gladly accept any return for a credit to be used at Turf-Tec International for future orders or a check refund may be issued. There is a 30% re-stocking fee for all returned merchandise whether an in house credit or a refund is requested and shipping charges will not be refunded. All returned merchandise must be new and in re-salable condition. Turf-Tec will only receive returns if a return authorization number is first obtained from Turf-Tec International. Again, all returned merchandise must be new and in re-salable condition and Turf-Tec does not pay return shipping fee's.