IN15-W - Turf-Tec Infiltration Rings 5 & 12 foot diameter - ASTM 5093 (Allow 3 weeks for construction)

$6,000.00
(No reviews yet) Write a Review
SKU:
IN15-W
Turf-Tec Infiltration Rings 5 & 12 foot diameter - ASTM 5093

Turf-Tec International, Tallahassee, Florida. USA (850) 580-4026This product is made by Turf-Tec International in the USA

ASTM Infiltration Rings

IN15-W : Turf-Tec SDRI Infiltration Rings 5 foot and 12 foot Diameters Sealed Double Ring Infiltrometer (SDRI) for ASTM 5093

The new Turf-Tec SDRI Infiltration Rings have diameters of 5 foot and 12 foot rings that match ASTM Standard D 5093-02 which replaced old ASTM D 5093-90.

The Turf-Tec SDRI Infiltration Rings are double ring for standard testing of soils with a hydraulic conductivity between 1X10-7 m/s to 1X10-10 m/s or tight soils with low infiltration rates.

The new IN15-W Turf-Tec SDRI Infiltration Rings have diameters of 5 foot and 12 foot rings that match ASTM Standard D 5093-02 which replaced old ASTM D 5093-90. These rings are for performing a Sealed Double Ring Infiltration Test or SDRI (S.D.R.I.).
The Turf-Tec Infiltration Rings are double ring for standard testing of soils with a hydraulic conductivity between 1X10-7 m/s to 1X10-10 m/s or tight soils with low infiltration rates.

They are constructed of durable aluminum outer ring and a  durable steel inner ring.  The inner ring is a seam welded one piece tank  to prevent leaks. The outer rings are constructed of rigid aluminum and bolted  together with the aid of a rubber gasket to form a tight seal. The inner  infiltration rings are also painted to prevent rust and insure a long life.   The outer rings are made from aluminum and do not require painting.

Click image to enlarge Turf-Tec IN15-W SDRI Infiltration Rings

Using the Turf-Tec SDRI Infiltration Rings for ASTM Standard D 5093-02 test method is useful for field measurement of the infiltration rate  of very slow infiltrating soils. This test method is useful for measuring liquid flow through soil  moisture barriers such as compacted clay liner or covers used at waste disposal  facilities, for canal and reservoir liners, for seepage blankets, lake and irrigation pond areas and for  amended soil  liners such as those used for retention ponds or storage tanks. It is also  useful in determining if a spill occurs, how the soil around the area will  react. This test method is government approved and matches ASTM Standards.  

The purpose of the double ring is to insure the downward flow of movement of  water to insure proper measurements.  These infiltration rings are ideal  for taking ASTM infiltration tests on all areas and match the ASTM 5093 test. The IN15-W Infiltration set comes with both inner and outer rings, rubber gasket for 12 X 12 foot Infiltration rings, bolts for 12 X 12 foot Infiltration rings, 3000 ml IV bag, rubber splash guard and all necessary hoses and fitting to conduct the complete ASTM Standard D 5093-02 test.The IN15-W Infiltration set comes with both inner and outer rings, rubber gasket for 12 X 12 foot Infiltration rings, bolts for 12 X 12 foot Infiltration rings, 3000 ml IV bag, rubber splash guard and all necessary hoses and fitting to conduct the complete ASTM Standard D 5093-02 test for the Sealed Double Ring Infiltration Test or SDRI.

The inner ring of the IN15-W Turf-Tec SDRI Infiltration Rings has a diameters of 5 foot x 5 foot and a overall height of 11 inches tall at its highest point.

Click image to enlarge Turf-Tec IN15-W SDRI Infiltration Rings

The inner ring of the IN15-W Turf-Tec SDRI Infiltration Rings has a diameters of 5 foot x 5 foot and a overall height of 11 inches tall at its highest point.

This method of testing is useful for field measurement of the infiltration rate of soils. This test method is useful for measuring liquid flow through soil moisture barriers such as compacted clay liner or covers used at waste disposal facilities, for canal and reservoir liners, for seepage blankets, and for amended soil liners such as those used for retention ponds or storage tanks. It is also useful in determining if a spill occurs, how the soil around the area will react. This test method is government approved and matches ASTM Standards.

Digging trench for center five foot Turf-Tec SDRI Infiltration ring installation.  The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements.  These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 5093 test.Digging     trench for center five foot Turf-Tec SDRI Infiltration ring installation. Installing outer SDRI 12 foot Turf-Tec Infiltration ring. The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements.  These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 5093 test.Installing     the outer 12 foot SDRI Turf-Tec Infiltration ring. Completed installation of the SDRI Turf-Tec Infiltration rings and filling rings to begin testing.  The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements.  These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 5093 test.Completed     installation of  Turf-Tec SDRI Infiltration rings and filling rings to begin testing.

Check Infiltration on:

  • Soil moisture barriers
  • Compacted clay liners
  • Soil Barrier testing
  • Covers used at waste disposal facilities
  • Waste Management - Final Covers
  • In-Situ Testing
  • Canal Liners
  • Reservoir liners
  • Seepage blankets
  • Amended soil liners
  • Retention ponds
  • Storage tanks
  • Test any area where soil is supposed to be almost impervious to water entry

Specifications:

  • Inner Steel Tank dimensions 60 X 60 X 11 inches (Weight is approximately 138 lbs)
  • Inner Tank constructed from 14 Gauge steel  (.07 inches thick)
  • Inner Tank has 2 ports, one for vent cap and one brass  ball valve for flexible bag inlet
  • Inner tank has 4 handles to aid in  insertion and transportation
  • Outer Tank constructed from .125 inches thick Aluminum (3mm thick) (Weight of each panel is approximately 45 lbs each)
  • Outer tank dimensions when assembled is 12 feet X 36 inches tall
  • Outer tank walls bolt together with 3/8  inch bolts and rubber gaskets (Supplied and pre-assembled)
  • Set comes with 2- 3000 ML flexible supply bag, clamps and brass shut off  valve, hose to connect flexible bag to inner ring and rubber splash guard
  • Inner ring is painted to insure long life and rust resistance
  • Outer ring is constructed from 100% Aluminum
  • All Specification meet or exceed ASTM Standard D 5093-02
  • Total Shipping weight (Palletized) 600 lbs (270 kg)

 IN15-W - Turf-Tec International 5 and 12 foot Infiltration Rings

Turf-Tec International Terms of Sale and Warranty LIMITED WARRANTY OF TURF-TEC INTERNATIONAL PRODUCTS Turfgrass Products Corporation - dba - Turf-Tec International ("Seller") warrants to the final purchaser, that all Turf-Tec International tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired by persons other than Turf-Tec International. To make a claim under this Limited Warranty, you must return the complete tool, transportation prepaid, to Turf-Tec International after contacting Turf-Tec International and receiving a return authorization number. Please include a dated proof of purchase with your tool. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY. Return Policy: Turf-Tec International has been in business since 1976 and we pride ourselves in producing quality tools that last for years and years. We offer a 100% satisfaction guarantee on all of our products and will gladly accept any return for a credit to be used at Turf-Tec International for future orders or a check refund may be issued. There is a 30% re-stocking fee for all returned merchandise whether an in house credit or a refund is requested and shipping charges will not be refunded. All returned merchandise must be new and in re-salable condition. Turf-Tec will only receive returns if a return authorization number is first obtained from Turf-Tec International. Again, all returned merchandise must be new and in re-salable condition and Turf-Tec does not pay return shipping fee's.