IN14-W - Turf-Tec Heavy Duty Infiltration Rings - 12 & 24" ASTM 3385

$875.00
(No reviews yet) Write a Review
SKU:
IN14-W
Turf-Tec Heavy Duty Infiltration Rings - 12 & 24 inch diameter for ASTM 3385

Turf-Tec International, Tallahassee, Florida. USA (850) 580-4026This product is made by Turf-Tec International in the USA

ASTM 3385 Double Ring Infiltrometer

IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM Infiltration Rings for ASTM 3385

The new Turf-Tec Heavy Duty Infiltration Rings have diameters of 12 and 24 Inches (60 CM and 30 CM) and an overall height of 20 inches (50 CM) that match ASTM Standard D 3385-03 which replaced old ASTM D 3385-94.

The new Turf-Tec Heavy Duty Infiltration Rings have diameters of  12 and 24 Inches (60 CM and 30 CM) and an overall height of 20 inches (50 CM)  that match ASTM Standard D 3385-03 which replaced old ASTM D 3385-94.

The Turf-Tec Infiltration Rings are double rings for standard  testing of soils with a hydraulic conductivity between 1X10-2 cm/s or less than  about 1 X 10-6 cm/s or sand type soils with high infiltration rates.

This Double Ring Infiltrometer set is constructed of heavy duty  and durable galvanized steel and braced with welded steel supports inside and  out to insure the rings stay evenly centered as they penetrate the soil. The  heavy duty set also has a 1/4 inch thick steel welded on top edge to allow  aggressive driving into hard soils.

Turf-Tec 12 and 24 inch infiltration rings are already  centered in position for ease of positioning rings and ease of insertion into  the soil. The welded handle and welded inside support braces insure the rings  are perfectly centered with every test. In addition, the center ring is already  suspended one inch above the outer ring to identically match the ASTM  specifications and to insure exact soil placement.

This method of testing is useful for field measurement of the infiltration rate of soils. Infiltration rates have applications in the field of liquid waste disposal, evaluation of potential septic tank disposal fields, leaching studies and drainage efficiencies. They are also helpful in determining irrigation requirements, water spreading or recharge, canal leakage and reservoir leakage testing and studies.

The Turf-Tec 12 and 24 inch ASTM Infiltration Rings are useful in industries like geology, geotechnical, engineering, hydrology, forestry, environmental testing, hydrogeological, runoff studies, wetland mitigation, permeability testing, sanitation contractors, project planning and EPA requirements.The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements. These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 3385 test.

The Turf-Tec 12 and 24 inch ASTM Infiltration Rings are useful in industries like geology, geotechnical, engineering, hydrology, forestry, environmental testing, hydro geological, runoff studies, rain gardens, wetland mitigation, permeability testing, sanitation contractors, project planning, Professional Engineers (P.E.) and EPA requirements. Double ring Infiltrometer, standard set.

Turf-Tec Infiltration Rings 12 and 24 inch come with Excel Spreadsheet for easy data recording.

Infiltration Rings 12 and 24 inch come with Excel Spreadsheet for easy data recording.  Link!

Turf-Tec 12 and 24 inch infiltration rings are already centered in position for ease of positioning rings and ease of insertion into the soil. The welded handle and welded inside support braces insure the rings are perfectly centered with every test. In addition, the center ring is already suspended one inch above the outer ring to identically match the ASTM specifications and to insure exact soil placement.

IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM  Infiltration Rings for ASTM 3385

Turf-Tec Mariotte Tubes are also available and highly recommended to maintain constant head pressure (IN12 Purchased separately)

Mariotte Tubes are  also available and highly recommended to maintain constant head pressure (IN12  Purchased separately) 

See IN12-W – Turf-Tec Mariotte Tubes

Specifications:

• Inner ring is 12 Inches Diameter (30 CM)

• Outer Ring is 24 Inch Diameter (60 CM)

• Overall height of 20 inches (50 CM)

• Unit weight 70 lbs(32 kg)

• Sturdy construction - Rings are welded into place to insure proper placement

• Inner ring is suspended one inch above outer ring to match ASTM 3385 Specifications

• Rust resistant galvanized steel is 14 Gauge (.10 inch thick)

• Top welded steel braced handles for ease of insertion and removal from test area

• Four 1/4 inch steel reinforcing braces insure center ring and outer ring stay in alignment during testing

• Rings come with brass ports for the attachment of optional IN12-W Mariotte Tubes

• Entire ring comes fully assembled and ready to use right out of the box

     

Also see the IN11-W Driving plates for the 12 and 24 Inch Infiltration rings.

    

Also see the IN11-W  Driving plates for the 12 and 24 Inch Infiltration rings

Also see the New Turf-Tec Mariotte Tubes (IN12-W) to allow you to maintain a constant head pressure.

..also see the New Turf-Tec Mariotte Tubes (IN12-W) to allow you to maintain  a constant head pressure

... also see our new Large Volume Turf-Tec Mariotte Tubes (IN13-W) to allow a constant head pressure to be maintained over a longer test period.

... also see our new Large Volume  Turf-Tec Mariotte Tubes (IN13-W) to allow a constant head pressure to be  maintained over a longer test period

 


IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch  Diameters ASTM Infiltration Rings for ASTM 3385

Turf-Tec International Terms of Sale and Warranty LIMITED WARRANTY OF TURF-TEC INTERNATIONAL PRODUCTS Turfgrass Products Corporation - dba - Turf-Tec International ("Seller") warrants to the final purchaser, that all Turf-Tec International tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired by persons other than Turf-Tec International. To make a claim under this Limited Warranty, you must return the complete tool, transportation prepaid, to Turf-Tec International after contacting Turf-Tec International and receiving a return authorization number. Please include a dated proof of purchase with your tool. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY. Return Policy: Turf-Tec International has been in business since 1976 and we pride ourselves in producing quality tools that last for years and years. We offer a 100% satisfaction guarantee on all of our products and will gladly accept any return for a credit to be used at Turf-Tec International for future orders or a check refund may be issued. There is a 30% re-stocking fee for all returned merchandise whether an in house credit or a refund is requested and shipping charges will not be refunded. All returned merchandise must be new and in re-salable condition. Turf-Tec will only receive returns if a return authorization number is first obtained from Turf-Tec International. Again, all returned merchandise must be new and in re-salable condition and Turf-Tec does not pay return shipping fee's.