Turf-Tec Precipitation and Uniformity Gauges
Precipitation and Uniformity Gauges can be set up in a head to head layout or in a grid pattern. Sold in a set of 16 large gauges and 4 small gauges for a total of 20 gauges and 20 stainless steel support spikes.
|Precipitation and Uniformity Gauges have a stainless steel support spike and are calibrated in 10th of an inch and millimeters. Smaller gauges are positioned next to sprinkler heads to catch the second or third lower stream from the nozzles.|
For checking the precipitation and uniformity of the water being delivered by each irrigation head.
Turf-Tec International is proud to introduce its re-designed Precipitation / Uniformity Gauges. These gauges are designed to be set up in a head to head or grid pattern to determine how much water is applied from an irrigation system and to also show the water coverage uniformity. They are also used in performing water audits are also excellent for correlating sprinkler run times with actual soil infiltration readings with companion tools like the Turf-Tec Infiltrometer.
The set of 20 calibrated gauges are calibrated in tenth of an inch and millimeters for ease of reading the amount of water in each gauge. The measuring cups are made from strong plastic and the mounting brackets are made from stainless steel for ease of use and long life. The set consists of 16 large gauges and 4 small gauges. The small gauges are positioned closest to the sprinklers to insure water collection from second and third stream nozzle designs.
Calibrated in inches and millimeters, there is no conversion from milliliters or volume to inches or millimeters per hour. Just install the gauges, run the cycle and look at the gauges.
These gauges were designed to determine two things:
1. They will indicate how much water each sprinkler head is applying in a given period of time.
2. They will reveal the uniformity of the water being delivered by each sprinkler.
Use these gauges to adjust each sprinkler nozzle for uniform coverage.
Use for water audits - Stop guessing - Get the facts - Save water - Save electricity
Each set consists of 20 calibrated precipitation gauges that are spread out in a uniform pattern between sprinkler heads. The set consists of 16 large gauges and 4 smaller gauges as well as 20 stainless steel stands for the gauges. They are calibrated in inches and millimeters.
PUGS2-W - Turf-Tec Precipitation and Uniformity Gauges