IN7-W - Turf-Tec Heavy Duty Double Ring Infiltration Rings 6 and 12 inch diameter by 4 inches tall
The new Turf-Tec Heavy Duty Infiltration Rings allow the field testing of soil infiltration rates quickly and easily with minimal amounts of time and water. These Turf-Tec Heavy Duty Infiltration Rings are designed to be inserted into the soil to a depth of two inches deep and then the rings are filled with water. The drop in water in the center ring is then measured over time to determine the rate of infiltration. These rings are made out of heavier gauge steel for rocky or hard soil types. These Infiltration rings are constructed of heavy duty 16 Gauge (.065 inch) galvanized steel to prevent rust and insure a long life. This tool is ideal for geotechnical students as well as anyone who wants to take a quick double ring infiltration test. They have a 6 inch inner ring and a 12 inch outer ring with a 4 inch height. A gripped rubber handle is attached to allow easy insertion into the soil.
These Turf-Tec Heavy Duty Infiltration Rings are designed to be inserted into the soil to a depth of two inches deep and then the rings are filled with water. The drop in water in the center ring is then measured over time to determine the rate of infiltration. These rings are made out of heavier gauge steel for rocky or hard soil types. These Infiltration rings are constructed of heavy duty 16 Gauge (.065 inch) galvanized steel to prevent rust and insure a long life.
Check Infiltration on:
- Golf greens
- Golf tees
- Sports fields
- New construction
- Drain fields
- Septic systems
- Six inch and twelve inch rings (15.24 cm X 30.48 cm)
- Height of four inches (10.16 cm)
- Weight 7 lbs (3.2 kg)
- No damage to turf or soil
- Sturdy construction
- Rust proof galvanized metal 16 Gauge (.060 inch)
- Double ring
- Rings are welded into place to insure proper placement
- Easy to use
Determine infiltration rate in a little as fifteen minutes*
Now, for the first time, a field instrument to measure the rate of water infiltration on all types of areas. This instrument determines the downward flow of water through the soil. The rings are centered by the welded handle on the top of the unit; this insures the rings stay in place while driving them into the soil.
The Turf-Tec Heavy Duty Infiltration Rings are a useful and necessary instrument. It is now possible to monitor how slow or fast rain or irrigation water moves into the soil. An excellent tool for engineers, earth science and forestry students.
*15 minute test does not take into account getting soil to saturation. For a 15 minute test a moisture sensor should be used to qualify soil moisture.
IN7-W Shown with optional IN6-W driving plate
Turf-Tec International Terms of Sale and Warranty
LIMITED WARRANTY OF TURF-TEC INTERNATIONAL PRODUCTS
Turfgrass Products Corporation - dba - Turf-Tec International ("Seller") warrants to the final purchaser, that all Turf-Tec International tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired by persons other than Turf-Tec International. To make a claim under this Limited Warranty, you must return the complete tool, transportation prepaid, to Turf-Tec International after contacting Turf-Tec International and receiving a return authorization number. Please include a dated proof of purchase with your tool.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
Turf-Tec International has been in business since 1976 and we pride ourselves in producing quality tools that last for years and years. We offer a 100% satisfaction guarantee on all of our products and will gladly accept any return for a credit to be used at Turf-Tec International for future orders or a check refund may be issued. There is a 30% re-stocking fee for all returned merchandise whether an in house credit or a refund is requested and shipping charges will not be refunded. All returned merchandise must be new and in re-salable condition. Turf-Tec will only receive returns if a return authorization number is first obtained from Turf-Tec International. Again, all returned merchandise must be new and in re-salable condition and Turf-Tec does not pay return shipping fee's.