Turf-Tec Infiltrometer Easy to use Double Ring Infiltrometer
Turf-Tec finally has answered the age old question, "How do I determine Infiltration rate?" The Turf-Tec Infiltrometer is simple to operate and easy to use! Determine infiltration rate in as little as fifteen minutes.
Now, for the first time, a field instrument to measure the rate of water infiltration on all areas. This instrument determines the downward flow of water through the turf and soil.
Elapsed time indicator makes it possible to correlate irrigation time to the infiltration rate of your turf. Record keeping of Infiltrometer readings can aid in keeping track of significant changes in water percolation.
Has double ring accuracy. The Infiltrometer has been used by 100's of Colleges, Universities and Government agency's. Trusted and reliable and made to last.
Turf-Tec offers many different ways of performing infiltration tests.
Another first from Turf-Tec International
Now utilized by the EPA (Environmental Protection Agency) for measuring urban runoff and some states DEP (Department of Environmental Protection) for storm water soil evaluations. Note some states might require 6 and 12 inch rings or 12 and 24 inch Infiltration rings (ASTM 3385) as regulations change from state to state - If larger rings are required, the Turf-Tec Infiltrometer is still very useful in "qualifying" the site that all soils are alike (confirmatory testing) and have consistent infiltration rates, allowing fewer large infiltration tests to be performed on larger test sites. See Below.
|Close up of count down timer and inch / millimeter indicator.
||Turf-Tec Infiltrometer can be use in testing percolation pits and for engineering firms and for storm water evaluation.
||Close up of double ring hardened cutter blades.
Check Infiltration on:
- Golf greens
- Golf tees
- Sports fields
- New construction
- Research plots
- Seed beds
- Environmental Science
- Drain Fields
- Wetland assessment
- Urban Runoff
- Drainage basins
- Retention ponds
- Infiltration pits and systems
- Percolation holes
- Storm water planning
- Storm water discharge
- Site Planning
- Rain Gardens
- No damage to turf or soil
- Inner ring diameter (ID) of 2 3/8 inches (6.03 cm)
- Outer ring diameter (ID) of 4 1/4 inches (10.79 cm)
- Inner ring hold appx. .5 L (When inserted into soil)
- Outer ring hold appx. .75 L (When inserted into soil)
- Unit weight 12 lbs (5.5 kg)
- Sturdy construction
- Rust proof zinc plating
- Depth limiting ring
- Count down timer clock with beeper alarm
- Water level scale in inches and millimeter
- Float and inch indicator
- Double ring
- Heat treated, case hardened cutter blade
- Handle grips
New! The EPA has also used the Turf-Tec Infiltrometer to replicate ASTM Specifications in tests for urban runoff. New! Report # 600r00016 - Website: http://www.epa.gov/ednnrmrl/ Link to File: Infiltration Through Disturbed Urban Soils and Compost-Amended Soil Effects on Runoff Quality and Quantity See section 2-7
New! The Pennsylvania DEP (Department of Environmental Protection) has also used the Turf-Tec Infiltrometer to be used as possible support for confirmatory testing for stormwater and soil evaluation and for Infiltration BMP's Design Guidelines however they prefer the IN8-W Infiltration rings. New! Website: http://www.depweb.state.pa.us/watershedmgmt/site/default.asp Link to File: Infiltration BMP Design Guidelines See Page 90 - 93
Link to File: PENNSYLVANIA Stormwater BMP Manual December 30, 2006 363-0300-002 Infiltration BMP Design Guideline See Appendix "C"
http://www.elibrary.dep.state.pa.us/dsweb/Get/Document-48488/16_CommmentResponse.pdf See Page 21
Link to File: Watershed Wetpond Retention Basin See Appendix Page 6-494
Turf-Tec International Terms of Sale and Warranty
LIMITED WARRANTY OF TURF-TEC INTERNATIONAL PRODUCTS
Turfgrass Products Corporation - dba - Turf-Tec International ("Seller") warrants to the final purchaser, that all Turf-Tec International tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired by persons other than Turf-Tec International. To make a claim under this Limited Warranty, you must return the complete tool, transportation prepaid, to Turf-Tec International after contacting Turf-Tec International and receiving a return authorization number. Please include a dated proof of purchase with your tool.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
Turf-Tec International has been in business since 1976 and we pride ourselves in producing quality tools that last for years and years. We offer a 100% satisfaction guarantee on all of our products and will gladly accept any return for a credit to be used at Turf-Tec International for future orders or a check refund may be issued. There is a 30% re-stocking fee for all returned merchandise whether an in house credit or a refund is requested and shipping charges will not be refunded. All returned merchandise must be new and in re-salable condition. Turf-Tec will only receive returns if a return authorization number is first obtained from Turf-Tec International. Again, all returned merchandise must be new and in re-salable condition and Turf-Tec does not pay return shipping fee's.