IN16-W - Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring

$450.00
(No reviews yet) Write a Review
SKU:
IN16-W
Turf-Tec Heavy Duty 12 Inch Diameter Single Infiltration Ring

Turf-Tec International, Tallahassee, Florida. USA (850) 580-4026This product is made by Turf-Tec International in the USA

IN16-W - Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring

IN16-W - Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring.  The new Turf-Tec Heavy Duty 12 Inch Diameter is a single ring Infiltration Ring has a diameters of 12 Inches (30 CM) and an overall height of 20 inches (50 CM).

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring shown here with optional driving plate (IN17-W) and optional 10,000 ml Mariotte Tube (IN12A-W)

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring shown here  with optional driving plate (IN17-W) and optional 10,000 ml Mariotte Tube  (IN12A-W)

 

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring shown here with optional 10,000 ml Mariotte Tube with site glass are also available and highly recommended to maintain constant head pressure (IN12A) Purchased separately

 

A 10,000 ml Mariotte Tube  with site glass are  also available and highly recommended to maintain constant head pressure (IN12A)  Purchased separately

 

See IN12-W – Turf-Tec Mariotte Tubes

 

The new Turf-Tec Heavy Duty 12 Inch Diameter is a single ring Infiltration Ring has  a diameters of  12 Inches (30 CM) and an overall height of 20 inches (50 CM).

This single ring Infiltrometer is constructed of very heavy duty  and durable galvanized steel and topped with a 1/4" thick steel reinforced  top edge for  driving into the soil. 

The Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring is  ideal for infiltration testing areas that do not need a double ring infiltration  test. You can set this ring on the area to be tested, place the optional 1/2"  thick steel driving plate (IN17-W) on top and drive the ring into the soil.  The ring can be filled  with water and then the infiltration rate can be determined by timing the amount  of time it takes the water to go into the soil. 

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring comes with  brass port located 7 inches above the base for the attachment of optional  IN12A-W Mariotte Tube.  This will allow you to maintain a constant head of water in  the ring during testing without the need for personnel to continually fill ring  while testing is being conducted.  The Mariotte Tube are also helpful for  periods of prolonged or overnight testing.

urf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring comes complete with inside welded steel brace for ease of extraction from soil.  This single ring Infiltrometer is constructed of very heavy duty and durable galvanized steel and topped with a 1/4" thick steel reinforced top edge for driving into the soil.

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring comes complete with inside welded steel brace for ease of extraction from soil.

_______________________________________________________________

This method of testing is useful for field measurement of the infiltration rates where a double ring Infiltrometer is not necessary to fulfill local or state infiltration test standards.

The simple design coupled with strong construction and a port already installed makes the addition of the optional Mariotte tube simple and seamless.

 

 

Turf-Tec Infiltration Rings 12 and 24 inch come with Excel Spreadsheet for easy data recording.

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Rings can be used with free Excel Spreadsheet for easy data recording.  Link! 

 


 

    

Also see the IN11-W  Driving plates for the 12 and 24 Inch Infiltration rings

Also see the New Turf-Tec Mariotte Tubes (IN12-W) to allow you to maintain a constant head pressure.

..also see the New Turf-Tec Mariotte Tubes (IN12-W) to allow you to maintain  a constant head pressure

... also see our new Large Volume Turf-Tec Mariotte Tubes (IN13-W) to allow a constant head pressure to be maintained over a longer test period.

... also see our new Large Volume  Turf-Tec Mariotte Tubes (IN13-W) to allow a constant head pressure to be  maintained over a longer test period

 

Specifications:

 

  • Infiltration ring is 12 Inches Diameter (30 CM)

  • Overall height of 20 inches (50 CM)

  • Weight is 35 lbs (15.6 kg)

  • Rust resistant galvanized steel is 11 Gauge (1/8 inch thick .125 inch thick)

  • Inside welded steel brace for ease of removal from test area

  • 1/4 inch steel reinforcing band on to top edge

  • Ring come with brass port located 7 inches above the base for the attachment of optional IN12-W Mariotte Tubes

  • Entire ring comes fully assembled and ready to use right out of the box

 

IN16-W - Turf-Tec Heavy Duty 12 Inch  Diameter Infiltration Ring

Turf-Tec International Terms of Sale and Warranty LIMITED WARRANTY OF TURF-TEC INTERNATIONAL PRODUCTS Turfgrass Products Corporation - dba - Turf-Tec International ("Seller") warrants to the final purchaser, that all Turf-Tec International tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired by persons other than Turf-Tec International. To make a claim under this Limited Warranty, you must return the complete tool, transportation prepaid, to Turf-Tec International after contacting Turf-Tec International and receiving a return authorization number. Please include a dated proof of purchase with your tool. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY. Return Policy: Turf-Tec International has been in business since 1976 and we pride ourselves in producing quality tools that last for years and years. We offer a 100% satisfaction guarantee on all of our products and will gladly accept any return for a credit to be used at Turf-Tec International for future orders or a check refund may be issued. There is a 30% re-stocking fee for all returned merchandise whether an in house credit or a refund is requested and shipping charges will not be refunded. All returned merchandise must be new and in re-salable condition. Turf-Tec will only receive returns if a return authorization number is first obtained from Turf-Tec International. Again, all returned merchandise must be new and in re-salable condition and Turf-Tec does not pay return shipping fee's.