IDG1-M - Turf-Tec Professional Model Infill Depth Gauge for synthetic turf

$395.00
(No reviews yet) Write a Review
SKU:
IDG1-M
Turf-Tec Professional Model Infill Depth Gauge for synthetic turf

Turf-Tec International, Tallahassee, Florida. USA (850) 580-4026

Turf-Tec Professional Model Infill Depth Gauge for synthetic  turf

Click here to see all our products relating  to artificial turf surfaces

Turf-Tec Professional Model Infill Depth Gauge - Aluminum and Stainless Steel construction     Turf-Tec Professional Model Infill Depth Gauge - Aluminum and Stainless Steel construction - In infill material

 

Now, you can easily and accurately measure your infill material on artificial turf with the Professional Model Infill Depth Gauge. This highly accurate depth gauge is specifically designed to test the new infill artificial turf surfaces to determine the depth of the infill rubber or rubber and sand topdressing on artificial turf sports fields. This device will also assure consistency from one area to another to insure the playing surface has uniform depths of infill material across the entire playing surface.

Instructions

  1. Place bottom aluminum foot plate firmly on infill surface
  2. Slide black center shaft down until three stainless steel spikes make contact with carpet backing
  3. Lift out and read gauge in inches or millimeters
  4. Note, you should check 2 or 3 areas at each location to get the average infill for that test area
  5. Test wear areas more frequently as these areas are usually where the infill is dispersed more frequently

Also keep in mind that infill does not break down, it often is just re-distributed to other areas of the playing surface. By using Turf-Tec Professional Infill Depth Gauge for Artificial Turf combined with proper grooming techniques and brushing, this will even out the infill better than just the addition of more infill or brushing and grooming alone.  This will save time, money and labor and also produce better and safer playing surfaces. 

Now, you can easily and accurately measure your infill material on artificial turf with the Professional Model Infill Depth Gauge. This highly accurate depth gauge is specifically designed to test the new infill artificial turf surfaces to determine the depth of the infill rubber or rubber and sand topdressing on artificial turf sports fields. This device will also assure consistency from one area to another to insure the playing surface has uniform depths of infill material across the entire playing surface.

Turf-Tec Professional Model Infill Depth Gauge

Also keep in mind that infill does not break down, it often is just re-distributed to other areas of the playing surface. By using Turf-Tec Economy Infill Depth Gauge for Artificial Turf combined with proper grooming techniques and brushing will even out the infill better than just the addition of more infill.  This will save time, money and labor and also produce better and safer playing surfaces.

     

     

 

Specifications

Professional Model Infill Depth Gauge - IDG1-M

Measures from 0 to 2 inches or 0 to 50 mm

Aluminum and Stainless Steel construction

Weight - 8.5 oz / 232 g

Size - 7.25 x 1.25 x 1.25 inch / 18.5 x 3 x 3 mm

The Turf-Tec Professional Model Infill Depth Gauge for for Artificial Turf is excellent for football, baseball, softball, soccer, lacrosse, field hockey, cricket anyplace that infill, crumb rubber, crumb rubber and sand filled artificial or synthetic turf is used 

Having the proper amount of infill on your artificial turf fields will also increase the life of the surface.

The Turf-Tec Professional Model Infill Depth Gauge for Artificial Turf is excellent for football, baseball, softball, soccer, lacrosse, field hockey, cricket anyplace that infill turf is used  


IDG1-M - Professional Model Infill Depth Gauge

Turf-Tec International Terms of Sale and Warranty LIMITED WARRANTY OF TURF-TEC INTERNATIONAL PRODUCTS Turfgrass Products Corporation - dba - Turf-Tec International ("Seller") warrants to the final purchaser, that all Turf-Tec International tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired by persons other than Turf-Tec International. To make a claim under this Limited Warranty, you must return the complete tool, transportation prepaid, to Turf-Tec International after contacting Turf-Tec International and receiving a return authorization number. Please include a dated proof of purchase with your tool. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY. Return Policy: Turf-Tec International has been in business since 1976 and we pride ourselves in producing quality tools that last for years and years. We offer a 100% satisfaction guarantee on all of our products and will gladly accept any return for a credit to be used at Turf-Tec International for future orders or a check refund may be issued. There is a 30% re-stocking fee for all returned merchandise whether an in house credit or a refund is requested and shipping charges will not be refunded. All returned merchandise must be new and in re-salable condition. Turf-Tec will only receive returns if a return authorization number is first obtained from Turf-Tec International. Again, all returned merchandise must be new and in re-salable condition and Turf-Tec does not pay return shipping fee's.